Cycletrol® C2000 , Cycletrol® Series DC Control

The Cycletrol C2000 Series DC drive provides rapid cycling up to 30 cpm. The C2000 serves as an accurate speed and cycling control.
  • Economical alternative for lighter duty cycling applications.
  • Wide speed range with full torque available down to 60 rpm.
Products specifications
Horsepower (120VAC) - 1/8-1 hp
(240VAC) - 1/8-1 hp
Armature Feedback (Speed Range) 30:1 full torque
Minimum Speed Fixed at zero
Maximum Speed 50 to 115% of motor base speed
Line Voltage 120 or 240 V
Maximum Duty Cycle 50/60Hz
Configurations single phase
Tachometer Feedback (Speed Range) 30 cycles/minute continuous with typical 1 HP motor. Total reflected inertia not to exceed 20% of armature inertia.
Armature Feedback (Speed Regulation) Chassis, NEMA 12
Ambient Temperature <5% of base speed (for 95% load change)
Selection 32-104°F
Armature Voltage 0-40°C (NEMA 12)
32-131°F
Due to Line Voltage Fluctuation 0-55°C (Chassis)
Due to Thermal Drift Power.
Acceleration Upto 1/2 HP - 176B3001 (120V 1Ø - Chassis Versions)
Upto 1 HP - 176B3003 (120V 1Ø - Chassis Versions)
Upto 1/2 HP - 176B3005 (240V 1Ø - Chassis Versions)
Upto 1 HP - 176B3007 (240V 1Ø - Chassis Versions)
Upto 1/2 HP - 176B3002 (120V 1Ø - NEMA 12 Versions)
Upto 1 HP - 176B3004 (120V 1Ø - NEMA 12 Versions)
Upto 1/2 HP - 176B3006 (240V 1Ø - NEMA 12 Versions)
Upto 1 HP - 176B3008 (240V 1Ø - NEMA 12 Versions)
Current Limit (120VAC) - 0-90
(240VAC) - 0-180
Logic Input <1% armature voltage change within input power range
Analog Speed Inputs <2% for control