HW75V3H , ReadyLine Cooling Tower Duty, Inverter Duty 10:1 (6-60Hz Variable Torque) Motor

Quote
HP 75
RPM 1200 rpm
Voltage 200 V
Full Load Efficiency 94.5
Full Load Current 201.0 A
Frame 405T
Shipping Weight 1260 lb
Discount Symbol DS-3HTL
Dimension (C) 37.7 in
Phase Three phase
Enclosure Open Dripproof (ODP)|Totally Enclosed Fan Cooled (TEFC)
Insulation Class B or F Insulation
Efficiency Premium Efficient, NEMA Premium® Efficient or EPACT
Nameplate CE Mark on nameplate (180 Frame or larger)
Agency UL® Recognized and CSA® Certified
World Motor® Features
  • Both 60 Hz and 50 Hz operations(without derating motor)
  • 250 Frame and larger ratings suitable for wye-start delta run or across-the-line starting
  • Energy Efficient per NEMA (2003) MG1,12-10
  • Meets EPACT 92 (USA), NOM 74 (Mexico), and CSA® C390 (Canada) efficiency levels
  • ALLGUARD® Motor Quality System
Options Space Heater@USD=597.00|Thermistor@USD=585.00|Shaft Grounding@USD=1859.00
  • For use in Cooling Tower, Evaporative Condenser and other commercial and industrial applications requiring protection from harsh operating conditions with high humidity.
  • INVERTER GRADE® Motors with Insulation that Exceeds the NEMA® MG-1 Part 31 Standard
  • Double Dip & Bake, 100% Solids, Polyester Insulation On Windings
  • Class F Insulation, 40°C Ambient
  • Cast Iron Frame
  • Bearing Isolators on “wet” end for vertical mounting positions
  • Double-Sealed, same-size bearings both ends
  • Sealed Bracket-to-Frame Registers & Leads
  • Stainless Steel Nameplate & Zinc Plated Hardware
  • 1.15 Service Factor
  • Rotor Balance better than 0.08 in/sec
  • NEMA® Design B Performance on 60 Hertz Sine Wave Power
  • Inverter Compatible: Exceeds NEMA® MG-1 Part 31 (10:1 Variable Torque)
  • Meets IEC 34-5 Classification IP55
  • Includes CORRO-DUTY® Motor Paint and Rotor Treatment.